Help with Pricing.

Please read the text below, it will help you to get more accurate powder coating prices.

215 Tyburn Road, Erdington, Birmingham B24 8NB
(800 Yards from Junction 6 M6 Spaghetti Junction)

When you send an enquiry the following tips will help you get a more accurate quote. Please provide as many as possible of the following list of items;

  • Dimensioned sketches or drawings, ideally pdf’s showing the length, width and height of each part.
  • Photographs of the parts if you have any.
  • Any special requirements such as masking required to holes or threads.
  • The colour required; preferably the RAL Number or other colour shade.
  • The Gloss Level; Matt, Semi-Gloss or Gloss.
  • The finish: Smooth, Textured or Leatherette.
  • Please indicate if there is a customer specification in place.
  • The batch size.
  • The more info we have the more accurate your price will be.
  • The type of powder

Please email this across to roger@powder-coatings.co.uk for an immediate response.

What is the customers specification?

The following factors affect Coating costs; the weight of the item to be coated, heavier items need more time in the oven so that the Powder Coating is properly cured and hardens properly.

Also a lot of fabricated parts can be made up of different thickness of materials, it is not unusual to see parts that are made of 4mm, 6mm and 10mm material. In these cases it is important to remember that the curing time needs to match the thicker material. It is a common fault amongst Powder Coaters that they fail to take account of the differing thicknesses with the result that the thicker materials do not get cured correctly and can cause the Powder Coated surface to chip and flake off.

Does the part have sufficient holes in so that it can be hung up to Powder Coat. All parts have to be hung on hooks or jigs so that the powder can be applied. Also if the items are longer than say 2 metres the holes need to be at each end of the part (or equidistant from the centre of the part) so that they can be hung horizontally.

Your Powder Coating Prices If the total quantity required is say 1000 but they will only be produced in 100 batches then this needs to be stated at the quoting stage. If a Coater quotes for a 1000 parts but only receives 100 then be prepared for a price hike!

Are there any special requirements? For instance are there areas where no powder coating is required. If so a drawing showing where powder is not required should be provided at the quoting stage.

Do the parts need packaging in a special way to avoid transit damage?

Do you require transport or is an ex works price okay? All these factors affect Powder Coating Prices.

Aluminium parts invariably need a pre-treatment as the oxide film on aluminium can affect the adhesion of the powder coated film.

Recommended pre-treatments for aluminium are Chromating, Flash Hard Anodising or Etching.

This has a marked effect on Powder Coating price list. Sometimes this is easy as it is marked on the drawing. For instance JCB Class B or a JLR Spec or words that describe the spec such as Degrease and Powder Coat in Semi-Gloss Black RAL 9005. Other times specs can be a bit obscure.

As a minimum the drawing should state the Colour (BS) The Gloss Level and the thickness range e.g. 60-80 microns (+ or – 5%). It is important to remember that the specification should be set by the customer. The issue should not be fudged whereby the Coater has to ‘best guess’ the spec.

Established over 50 years  — Central location, Junction 6 M6 Spaghetti — ISO 9001 Approved quality systems - Established over 50 years — Central location, Junction 6 M6 Spaghetti - ISO 9001 Approved quality systems — Established over 50 years - Central location, Junction 6 M6 Spaghetti — Established over 50 years - Central location, Junction 6 M6 Spaghetti — ISO 9001 Approved quality systems - Established over 50 years — Central location, Junction 6 M6 Spaghetti - ISO 9001 Approved quality systems — Established over 50 years - Central location, Junction 6 M6 Spaghetti — ISO 9001 Approved quality systems - Established over 50 years — Central location, Junction 6 M6 Spaghetti - ISO 9001 Approved quality systems — Established over 50 years - Central location, Junction 6 M6 Spaghetti — ISO 9001 Approved quality systems - Established over 50 years — Central location, Junction 6 M6 Spaghetti - ISO 9001 Approved quality systems — Established over 50 years - Central location, Junction 6 M6 Spaghetti — ISO 9001 Approved quality systems - Established over 50 years — Central location, Junction 6 M6 Spaghetti - ISO 9001 Approved quality systems — Established over 50 years - Central location, Junction 6 M6 Spaghetti — ISO 9001 Approved quality systems - Established over 50 years — Central location, Junction 6 M6 Spaghetti - ISO 9001 Approved quality systems — Established over 50 years - Central location, Junction 6 M6 Spaghetti — ISO 9001 Approved quality systems - Established over 50 years — Central location, Junction 6 M6 Spaghetti - ISO 9001 Approved quality systems — Established over 50 years - Central location, Junction 6 M6 Spaghetti — ISO 9001 Approved quality systems - Established over 50 years

Address

215 Tyburn Road, Erdington,
Birmingham B24 8NB
See Location

Phone

Please call us on
0121 250 2145 or call, text or WhatsApp 07880 733590

}

Hours

We are open
Mon to Thurs 7am till 4pm
Fri 7am till Midday

Email & Web

roger@powder-coatings.co.uk
www.powder-coatings.co.uk
We respond quickly to enquiries